Proposal Number V(B)-5234 |
Double Column Coordinate Boring and Milling Machine with independent NC Controlled Deep Hole Drilling Unit |
| |
Manufacturer |
|
Kolb |
| |
Model |
|
KBN G 120 |
| |
Year |
|
1984 / 2006 |
| |
Control |
|
Heidenhain TNC 426 |
|
|
| |
Table size: |
|
2200 x 3240 mm |
| |
Table load: |
max. |
14000 kg |
| |
Distance spindle to table/floor plate: |
min/max. |
100 - 1300 mm |
| |
Distance between the columns: |
|
2750 mm |
| |
Table longitudinal travel: |
X |
3000 mm |
| |
Headstock cross travel: |
Y |
2180 mm |
| |
Spindle vertical travel: |
Z |
500 mm |
| |
Deep hole drill support vertical travel: |
Z2 |
450 mm |
| |
Crossrail vertical travel: |
W |
1000 mm |
| |
Cutting feeds: |
X,Y,Z |
1 - 2000 mm/min. |
| |
Rapid traverses: |
X,Y,Z |
10000 mm/min. |
| |
Spindle motor rating: |
|
46 KW |
| |
Spindle speed range: |
|
14 - 1400 rpm |
| |
Number of gear steps: |
|
2 |
| |
Spindle torque: |
max. |
2500 Nm |
| |
Boring spindle diameter: |
|
120 mm |
| |
Milling spindle diameter: |
|
224 mm |
| |
Spindle taper: |
|
ISO 50 |
| |
Drilling capacity in ST60: |
Ø |
100 mm |
| |
Boring capacity in ST60: |
Ø |
300 mm |
| |
Tapping capacity: |
|
M125 x 3 |
| |
Milling capacity: |
|
730 cm³/min. |
| |
Deep hole drilling spindle speeds: |
|
35 - 3500 mm |
| |
Machine weight: |
|
kg |
| |
Machine dimensions: |
L x W x H |
mm |
| |
Equipped with: |
|
Main spindle for boring and milling;
Second spindle for deep hole drilling;
Seperate high pressure cutting oil system for the deep hole drill.
Seperate centrifuge and oil seperation system for the deep hole drill.
|
| |
Condition: |
|
Excellent working condition.
Inspect under power ! |
|
|
Deutsch 
to shopping cart))
))
))
))
))
))
))
))
))
))
))
))
))
))
))
))
))
))
