Proposal Number V(K)-6819 |
CNC VTL / Vertical Borer with C-Axis, Milling Spindle and Pallet Changer |
|
Manufacturer |
|
Carnaghi (Pietro) |
|
Model |
|
ATF 8 TM |
|
Year |
|
1995 |
|
Control |
|
NUM 1060/II |
|
|
Number of pallets in system: |
|
2 |
|
Pallet diameter: |
|
800 mm |
|
Pallet load: |
max. |
1500 kg |
|
Pallet change type: |
|
Swing/Rotary |
|
Swing diameter: |
max. |
1100 mm |
|
Turning diameter: |
max. |
1000 mm |
|
Milling diameter: |
max. |
1000 mm |
|
Distance spindle nose ~ table: |
max. |
750 mm |
|
Turning height: |
max. |
750 mm |
|
Ram cross section: |
|
250 x 250 mm |
|
Cutting force at the ram: |
max. |
25000 N |
|
Feed force: |
X,Z |
45000 N |
|
Ram cross travel: |
X |
-500/+2120 mm |
|
Ram vertical travel: |
Z |
750 mm |
|
Cutting feeds: |
X,Z |
0.1 - 3000 mm/min. |
|
Rapid traverse rate: |
X,Z |
10000 mm/min. |
|
Table motor rating: |
|
60 KW |
|
Table speed range: |
|
1.5 - 1000 rpm |
|
Gear steps: |
|
2 |
|
Torque at the table: |
max. |
60000 N |
|
C-Axis: |
|
0.001° degrees |
|
C-Axis speeds: |
|
0.01 – 5 rpm |
|
C-Axis brake force: |
|
50000 N |
|
Spindle taper: |
|
BT 50 |
|
Milling spindle motor rating: |
|
23.5 KW |
|
Milling spindle speeds: |
|
12 - 3000 rpm |
|
Torque at the milling spindle: |
max. |
1000 N |
|
Automatic tool magazine positions: |
|
80 |
|
Live tool positions (possible) : |
|
80 |
|
Tool diameter: |
max. |
125 mm |
|
Tool length: |
max. |
400 mm |
|
Tool to tool time : |
|
12 sec. |
|
|
|
|
|
Machine dimensions: |
L x W x H |
10000 x 8000 x 4500 mm |
|
Machine weight: |
approx. |
t.b.a. |
|
Equipped with: |
|
Chip conveyor
2x 630 mm 3-jaw chucks
Coolant through the spindle 6 – 12 bar
2x 3-jaw 800 mm faceplates
2 x 6-jaw 1000 mm manual faceplates
Oil coolant unit
Paper band filter for coolant
Linear scale feedback
Prepared for probe
|
|
Condition: |
|
Very good. Tight tolerances. Ex-Aerospace machine |
|