Proposal Number L-4821 |
CNC Lathe/Turning Centre for Shaft Machining |
| |
Manufacturer |
|
VDF Boehringer |
| |
Model |
|
VDF 450-T4/2000 |
| |
Year |
|
2012 |
| |
Control |
|
Siemens 840D sl |
|
|
| |
Swing diameter over the bed: |
|
700 mm |
| |
Turning diameter: |
max. |
650 mm |
| |
Workpiece length: |
max. |
2200 mm |
| |
Travels: |
|
|
| |
Upper Tool Turret Left: |
|
|
| |
Facing travel: |
X |
340 |
| |
Longitudinal travel : |
Z |
2460 mm |
| |
Upper Tool Turret Right: |
|
|
| |
Facing travel: |
X |
340 mm |
| |
Vertical travel for off centre machining: |
Y |
+/- 100 mm |
| |
Longitudinal travel: |
Z |
2460 mm |
| |
Rapids: |
X/X2/Y |
15000 mm/min. |
| |
|
Z/Z2/W1/W2 |
30000 mm/min. |
| |
Spindle nose: |
|
DIN 55026 |
| |
Spindle bore: |
|
103 mm |
| |
Spindle bearing diameter: |
|
150 mm |
| |
Spindle drive motor rating: |
100% / 60% |
60 / 72 KW |
| |
Spindle speeds: |
|
0 - 2800 rpm |
| |
Gear steps: |
|
2 |
| |
Spindle torque: |
100% / 60% |
4444 / 5335 Nm |
| |
C-Axis: |
C |
0.001 degrees |
| |
C-Axis speeds: |
|
0 - 30 rpm |
| |
C-Axis torque max.: |
40% |
600 Nm |
| |
Chuck diameter: |
|
320 mm |
| |
Chuck type: |
|
Roehm 320/3 |
| |
Tool Turrets: |
|
2 x Sauter Disc-Type (Servo) |
| |
Upper Tool Turret Left - Turret tool positions: |
|
12 |
| |
Driven/Live tool positions: |
max. |
12 |
| |
Tool taper: |
|
VDI 50 |
| |
Driven/Live tool motor rating: |
100% |
8.17 KW |
| |
Driven/Live tool speeds: |
|
rpm |
| |
Drive torque: |
100% |
48 Nm. |
| |
Upper Tool Turret Right - Turret tool positions: |
|
12 |
| |
Driven/Live tool positions: |
max. |
12 |
| |
Tool taper: |
|
VDI 50 |
| |
Driven/Live tool motor rating: |
100% |
8.17 KW |
| |
Driven/Live tool speeds: |
|
|
| |
Drive torque: |
100% |
48 Nm. |
| |
Tailstock taper: |
|
MT#5 |
| |
Tailstock force: |
|
18 kN |
| |
Hydraulic steady rest: |
|
|
| |
Steady rest clamp range: |
|
50 - 315 mm |
| |
Chip conveyor: |
|
|
| |
Chip volume output: |
|
400 kg/h |
| |
Discharge height: |
|
1300 mm |
| |
Electrics: |
|
400-480 V / 3 Ph / 50-60 Hz. |
| |
|
|
|
| |
Machine weight: |
|
27000 kg |
| |
Length x Width: |
|
5100 x 2800 mm |
| |
Height: |
|
2860 mm |
| |
Equipped with: |
|
VDF 450-T4/2000 8-Axis CNC Turning Center for Automated Production of Axles, Shafts, or similar cylindrical products.
CNC Control: Siemens Sinumerik 840Dsl Solution Line; Ethernet; Front Port USB.
Machine Features:
Twin Upper Left and Right Sauter BA-977 Disk-type Power Servo Turrets permitting highly accurate simultaneous or 1st /2nd/3rd op single setup cutting on workpieces; C-axis in main spindle;
Driven-tool capability in both upper turrets;
Y-axis in Upper Right turret;
Rohm 320/3 KKHFR Hydraulic Combination 3-Jaw Chuck featuring (counter) centrifugal-force compensation, powered face-driving center, and retractable clamping jaws at speeds below 500 rpm to permit full length roughing and finish-turning of shaft in single setup; Rohm Hydraulic turn-through steady rest Model SLZ.50315/C100- Servo-controlled and air purge for programmable positioning including interference-free locations behind main spindle and tailstock;
Servo-controlled programmable tailstock with independent cooling and pressure monitoring;
Geared High power AC Spindle motor (72 kWP @ 60% duty cycle, achieved at 130 RPM)/ produces 5335 Nm torque at spindle at 60% DC - sustainable to 130 RPM;
MINERALIT polymer concrete machine base for vibration resistance.
Equipped with:
-Rohm 320/3 Hydraulic 3-Jaw Combination Clamping and Face Driving Chuck with retractable clamping arms/jaws, and power-operated face driver. (Retract jaws to machine jaw clamping seat- part is driven by powered face driver; return jaws to clamp on part for rough turning; retract jaws again to finish turn full length end to end, driven by face driver).
-Rohm SLZ.50315/C100 Hydraulic Steady Rest 50-315 mm clamping range
- 2x (Left/Right) 12-Station Sauter Servo Power Disk Turrets (for static or driven rotary tools)
-Assortment of static tool holders
-Marposs T18 Toolsetting Probe with E32R Electrical Interface and Auto Arm
-Central lubrication unit
-Oil-Mist Filtration and Suction System
-Brinkmann/Knoll High-pressure coolant system including pumps, filtration, and reservoir
-Knoll Chip Filtration and Conveyor System
-Comprehensive documentation for machine operation, controls, programming, job setup, maintenance, assembly drawings, sub-assembly drawings & maintenance; spare parts lists, etc, in printed and electronic forms
|
| |
Condition: |
|
Excellent |
|
|
Deutsch 
to shopping cart))
))
))
))
))
))
))
))
))
))
))
))
))
))
))
))
))
))
))
))
))
))
))
))
))
))
))
))