D'Cunha Industriemaschinen GmbH
  Deutsch

Used Machines

Proposal Number MH-6178

5-Axis High Speed Horizontal Machining Centre with Pallet Changer

  Manufacturer   Makino
  Model   MAG 1
  Year   2015
  Control   Fanuc 31iB + Professional 5
back to shopping cart
  Workpiece diameter: max. 1500 mm
  Workpiece height: max. 1500 mm
     
  Number of pallets: 2
  Pallet size: 800 x 1000 mm
  Pallet load: max. 1300 kg
  Pallet change time: 23 sec.
  NC-Rotary table - High precision : B-Axis 360°/0.0001°
     
  NC-Swivelling milling head: A-Axis +100°/-110°
     
  Working travels:  
  Column travel: X 1520 mm
  Spindle vertical travel: Y 1100 mm
  Table infeed travel: Z 1350 mm
     
  Cutting feeds: X/Y/Z 1 - 50000 mm/min.
    B 1 - 6000 °/min.
    A 1 - 7200 °/min.
     
  Rapid traverses: X/Y/Z 50000 mm/min.
    B 6000 °/min.
    A 7200 °/min.
     
  Spindle taper: HSK-80F
  Spindle bearing diameter:   n/a mm
  Spindle drive motor: 80 KW
  Spindle speeds: 500 - 33000 rpm
  Spindle torque: max. 23.1 / 40 Nm
     
  Tool magazine & Automatic tool changer:  
  Tool taper: HSK-80F
  Tool magazine positions: 120 station tool magazine
  Tool diameter : max. 90 mm
  Tool length: max. 305 mm
  Tool weight: max. 8 kg
  Tool-to-tool time: 17 sec.
  Chip-to-chip time: 20 sec.
     
  Electrical connection :   200 kVA
     
  Machine weight: approx. 33000 kg
  Machine dimensions Length x Width (floor space): L x W 9700 x 5760 mm
  Machine height: H 3906 mm
  Equipped with:   High Speed - High Accuracy - 5-Axis

5-Axis machining with NC-Rotary table & NC-Swivelling
milling head;

Twin pallet changer, with 4 cone clamping and pull studs in cone centres

Pallet mechanical clamping and hydraulic unclamping

Air purge during pallet change cycle with seat check

120 station tool changer - Arm with twin gripper

HSK-80F tool taper . simultaneous face and cone contact, ideal for high speed machining

High power high speed spindle for high metal removal rates

Z Axis with twin ballscrews / twin motors

1 piece bed

3 point installation and levelling

Spindle and ballscrew temperature controller

Coolant unit 1590 L capacity

Spindle head wash coolant system

Spindle surround 4 nozzle coolant system 18 l/min.

Ceiling shower coolant 180 l/min.

Terrace wash coolant 190 l/min.

Coolant chiller

Central chip conveyor with ideal chip fall

Dual layer lift up chip conveyor

Cyclonic filtration unit

Air dryer

Full guarding

3-Axis pocket machining (pocketing)

Multi Axis contour finishing

Portable manual pulse generator with monitor (electrical hand wheel)

High Speed Motion Control (SGI)

SGI 4 (Super Geometric Intelligence Control)

RISC processor

Look-ahead processing 600 blocks

Material removal rate (Aluminium) max. 5400 cc/min.

MAG Series Integral Vibration Monitoring

Tool Center Point Control TCP

3D Cutter radius compensation

Tilted work plane command

Manual feed for 5-Axis machining (with MPG)

Tool life monitoring

Auto Tool Length Measurement (ATLM) - BLUM Laser unit + broken tool sensor

Auto work piece measurement - Work probe

Linear scale feedback X,Y,Z - 0.1 µm


  Condition:   AS NEW - 300 spindle run hours !

With what you save you could buy a brand new fully fitted Ferrari SF90 Stradale and still have change over !
back to shopping cart
 
Bild vergrößern
Bild vergrößern
Bild vergrößern
Bild vergrößern
Bild vergrößern
Bild vergrößern
Bild vergrößern
Bild vergrößern
Download Movie Clip
Download Movie Clip
Download Movie Clip
Download Movie Clip
Download Movie Clip